Introducing Dawson Durr

Introduction

 My name is Dawson Durr and I am a sophomore engineering major.

Interests

I'm a huge 3D printing enthusiast and practically live in the makerspace. So far, I've created my own portal gun replica, a stormtrooper helmet, and most recently a full Mandalorian costume. I am currently in the planning process to make a 3D-printed electric guitar.





Aside from 3D printing, I have been trying to get into the woodshop more with some more hands on projects. I recently built a pinewood derby ramp for TUFR.

On campus I am an officer in SWE and ASME and involved with Dr. Treadway's lab, CAT, Stand Band, and the wind ensemble.

I also enjoy playing disc golf, which Ryan recently introduced me to. I support the Dallas Cowboys every Sunday.

Expectations

I hope to see all of you get comfortable with using the makerspace and see y'all use it beyond this course. This course is a great opportunity that is very unique for non-engineering majors at other schools.

Comments

Post a Comment

Popular posts from this blog

Scott Wald Project 1: Building with hand tools

Image
 Process The first part of making the tool tote is to create a design in fusion360. This extremely specific software is useful in the building process because of how you can specify exact dimensions in the blue prints. After this, it is useful to sketch all of the building pieces on a piece of paper and label them all with letters. The next step is to carefully draw out the tool tote pieces on a large piece of plywood. Next, the chop saw needs to be used to cut the plywood into more digestible and workable pieces. After this the bandwidth saw needs to be used to cut out the exact pieces needed for the project. This does not solidify the design though because pieces are still free from each other, so they can be switched around based on the builder's preference. In my case, I moved two walls from holding together a smaller handle to be at either end of the tote to hold a long bar, and therefore opening more room within the tote for larger tools. This handle was made by finding a nic...
Read more

Nate Goodwin Project 1: Building With Hand Tools

Image
Process The first step in making the toolbox was to create the design in Fusion360. Fusion360 helps to model digitally what the finished toolbox would look like, with specific measurements for pieces listed as well.  Model of the Toolbox Made in Fusion360 Blueprint of my toolbox After this was to sketch the pieces on a board of wood. This was then cut  using a miter saw and bandsaw into the pieces of the toolbox. A jigsaw was used for cutting out the handle. The cut pieces arranged in the shape of my toolbox I then sanded down the pieces so they didn't splinter. After that I used a drill and screws to put the pieces together. We have a finished product! Results I'm really happy with how my tote turned out! For being one of my first woodworking pieces, It looks great! In terms of the process, I had to have some help with a few of tools, which now that I have an even greater understanding of them, I should be even better off when working on wood in the future.  Reflection T...
Read more

Liberty Mata Project 1: Building with hand tools

Image
 Process To start off the design process, I followed the provided tutorial instructions to create a basic tool tote in Fusion 360. Then, I modified the original tote design to include a round bar handle, softer edges around the top of the main tote compartment, and heart-shaped cutouts below the handlebar. Once I had my design finalized, I drew the appropriate measurements onto my wood plank and created outlines coinciding with the boards needed to construct the assets of my tote. I proceeded to use the chop saw to cut down my plank into more manageable sections and used the bandsaw to cut out my outlined pieces. I sanded all of the edges of my pieces and used a trim router to soften the top edges of the main tote compartment. I also used a drill press to create holes in two of my pieces to fit my handlebar and, on those same pieces, I used a jigsaw to cut out the heart-shaped designs. Next, I mock-constructed my tote and marked some ideas for where to add screws. I drilled small e...
Read more