Liberty Mata Proposal: Mixed Techniques

Proposal Statement

I plan to make a detailed wooden chess board using the CNC and Laser cutter. It will be made in two parts, the base and squares, decorated separately and then assembled. I will then use the 3D printer for pieces and then paint them.

Inspo pics


Advise

I'm expecting to ask my friends in Engineering and the MakerSpace for advice like usual (i.e. John and Meyer).


Rough Game Plan

I plan to make the base of the chess board using the CNC. To decorate it, I will engrave patterns onto the edge of the board then stain the material. I will make the squares of the board using the laser cutter. I will then paint them and glue them onto the base. I will use the 3D printer to create custom chess pieces, and then paint them to differentiate each player’s pieces.

CNC Base Board Design



Needs

I will need a decently sized piece of wood (about ¾” thick) to create the base of the board, this material will be cut using the CNC and then laser engraved. Next I will need thin plywood for laser cutting the squares. Finally, I will need PLA for printing the pieces. To decorate, I will use paint and wood stain.


Comments

Post a Comment

Popular posts from this blog

Scott Wald Project 1: Building with hand tools

Image
 Process The first part of making the tool tote is to create a design in fusion360. This extremely specific software is useful in the building process because of how you can specify exact dimensions in the blue prints. After this, it is useful to sketch all of the building pieces on a piece of paper and label them all with letters. The next step is to carefully draw out the tool tote pieces on a large piece of plywood. Next, the chop saw needs to be used to cut the plywood into more digestible and workable pieces. After this the bandwidth saw needs to be used to cut out the exact pieces needed for the project. This does not solidify the design though because pieces are still free from each other, so they can be switched around based on the builder's preference. In my case, I moved two walls from holding together a smaller handle to be at either end of the tote to hold a long bar, and therefore opening more room within the tote for larger tools. This handle was made by finding a nic...
Read more

Nate Goodwin Project 1: Building With Hand Tools

Image
Process The first step in making the toolbox was to create the design in Fusion360. Fusion360 helps to model digitally what the finished toolbox would look like, with specific measurements for pieces listed as well.  Model of the Toolbox Made in Fusion360 Blueprint of my toolbox After this was to sketch the pieces on a board of wood. This was then cut  using a miter saw and bandsaw into the pieces of the toolbox. A jigsaw was used for cutting out the handle. The cut pieces arranged in the shape of my toolbox I then sanded down the pieces so they didn't splinter. After that I used a drill and screws to put the pieces together. We have a finished product! Results I'm really happy with how my tote turned out! For being one of my first woodworking pieces, It looks great! In terms of the process, I had to have some help with a few of tools, which now that I have an even greater understanding of them, I should be even better off when working on wood in the future.  Reflection T...
Read more

Liberty Mata Project 1: Building with hand tools

Image
 Process To start off the design process, I followed the provided tutorial instructions to create a basic tool tote in Fusion 360. Then, I modified the original tote design to include a round bar handle, softer edges around the top of the main tote compartment, and heart-shaped cutouts below the handlebar. Once I had my design finalized, I drew the appropriate measurements onto my wood plank and created outlines coinciding with the boards needed to construct the assets of my tote. I proceeded to use the chop saw to cut down my plank into more manageable sections and used the bandsaw to cut out my outlined pieces. I sanded all of the edges of my pieces and used a trim router to soften the top edges of the main tote compartment. I also used a drill press to create holes in two of my pieces to fit my handlebar and, on those same pieces, I used a jigsaw to cut out the heart-shaped designs. Next, I mock-constructed my tote and marked some ideas for where to add screws. I drilled small e...
Read more